Logic Pro X Update - Logic Studio Training.Logic Pro X is all about huge projects, with or without a Mac Pro - CDM Create Digital Music

Looking for:

Is there a major Logic Pro X update or Logic Pro 11 around the corner? - - All replies 

Click here to DOWNLOAD

     

Logic Pro X Update - Logic Studio Training - Post navigation

 

Regions now display correctly when Flex mode is toggled. Fixes an issue where detected transients are sometimes shifted slightly to the right. Reset All now reliably removes all Flex edits. The accuracy of Transient detection is improved. Flex pitch notes are now displayed on flattened takes. Improves Flex Time analysis for audio files with low levels Enabling Flex Time after a new tempo analysis has been performed on the audio file now uses the newly created Tempo Flex Markers.

Fixes an issue where the section of an audio region before the first Flex marker is unexpectedly stretched or compressed after Smart Tempo analysis. It is now possible to accurately set the position of the Playhead on the Smart Tempo Editor while working in trimmed regions.

Fixes an issue where the Catch Playhead Position controls in the Smart Tempo Editor occasionally activate unexpectedly.

Fixes an issue where adjusting the left border of an audio region in ADAPT mode, in projects that contain time signature changes, occasionally causes audio in the region to go out of sync. Monitoring level in the Smart Tempo Editor is no longer reset sometimes when using key commands to start or stop playback. Alchemy Alchemy now tunes each note based on the sum of its detune offset and the tuning table. Disabling an Alchemy track and then performing Consolidate Project no longer adds an unexpected.

Alchemy now includes a Limiter switch in the header. Text in the Alchemy search filed now persists when a patch is selected. MP3 files can now be dragged directly into Alchemy. Option-clicking oscillator controls in Alchemy now sets them to Plug-ins The "Clear all Pads" command in Drum Machine Designer now immediately removes all icons and labels from the window. There is now an option to prevent the Gain setting from affecting frequency display in the Channel EQ.

It is now possible to adjust the Q setting on the selected band in the Channel EQ by moving the cursor. The scaling of EQ gain values when dragging a band Wirth mouse has been improved to make fine adjustments easier when the Gain Range is set to 30 dB.

The scale view in the Channel EQ is now maintained when a plug-in setting is loaded. The frequency setting in Channel EQ can now be adjusted in finer increments. The vertical scale of the Channel EQ display now adjusts dynamically, depending on how much boost or cut is applied. Using the MIDI Randomizer plug-in to randomize release velocity no longer sometimes causes unexpected hanging notes new notes.

The Size parameter in Space Designer is now available in the surround configuration. Bypassing Autofilter no longer causes an unexpected change in signal level. The Retrosynth polyphonic glide parameter now behaves predictably when playback is started. Logic no longer scans Audio Units at every launch on some computers. There is now an option to initialize plug-in and Software Instrument settings. Changed settings in the AU Roger beep Audio Unit plug-in are now accurately displayed when the Sensitivity is changed while in Controls view and then the view is switched to Editor.

Ultrabeat now displays in higher resolution on high density displays. The Vintage Organ now offers a switch to change the Scanner Mode. Automation on tracks using Audio Unit V3 instruments no longer causes hung notes at certain buffer settings. Plug-ins now continue to work on computers with more than plug-ins installed. Fixes an issue where scrubbing the Delay Time parameter in the Tape Delay or Stereo Delay plug-in sometimes causes the parameter to jump to its minimum setting.

Resolution of the Gain setting in the Limiter plug-in has been increased to 0. ES1 settings that use noise now play correctly when the sound is re-triggered.

The cursor now reliably shows the correct glyph when adjusting controls in the Channel EQ. When running Sculpture in HD mode, the string sound no longer unexpectedly undampens while using the maximum Inner Loss setting. The view in the Clarinet instrument now updates properly when Default is selected from the plug-in menu. Fixes an issue where turning the length parameter down in Space Designer 1.

Channel strips are now added to the track stack in the track list when adding sounds to empty pads in Drum Machine Designer. Parameters for exclusive groups in Drum Machine Designer are now available in the contextual menu. Drum Machine Designer cells can now be dragged to new position to exchange their sounds.

It is now possible to independently set the input and output note for each pad in Drum machine Designer. Drummer regions that are inside folders can now be converted to MIDI regions. Drum Machine Designer cells now respond to mouse clicks while Logic is playing. There is now a preference to create an empty kit when adding a Drum Machine Designer instance to a project.

Drummer regions created by the "Copy Section between Locator" command are now fully editable. Drummer no longer allows the Kick and Snare to be set to follow its own track. Pasted automation now includes interpolated events. It is now possible to change the automation mode for multiple selected tracks at once using a Key Command.

If a track is currently showing Track Based Automation, and Autoselect Automation is enabled, editing notes in the Piano Roll no longer changes the automation display to with to Velocity in the Tracks area. Fixes an issue where selecting an Aux in the Track List and then another channel no longer causes incoming CC7 messages to continue to control the Aux. Auto Select Automation Parameters now excludes Solo.

When track based automation is changed to region-based automation, or vice versa, the automation display now switches to show the newly converted automation type. Grabbing a scrubber style control in a plug-in with Automation Autoselect enabled now sets the Automation type to the control consistently. It is now possible to selectively disable interpolation for specific automation nodes by Option-clicking them with the Automation Curve tool.

The secondary channel in the Inspector Channel Strip now consistently shows the expected channel when Automation View is on together with "Autoselect Automation Parameter. Fixes an issue where the key command for activating channel strip Volume automation could incorrectly activate MIDI channel 1 volume Relative Automation is now displayed when Autoselect Automation Parameter is enabled.

After splitting a region that contains a Region-based automation ramp, moving an automation point to the start of the resulting right-hand region now reliably overwrites the existing automation.

Switching on Automation view in the Audio Tracks Editor now sets the correct default tools. Resolves an issue where automation points sometimes unexpectedly jump when dragging them. Flex-based transients are now used when regions are exported as Apple Loops. Dragging an Apple Loops into the Tracks Area while Logic is playing with the metronome enabled no longer causes the metronome to stop making sound for several seconds. Dragging multiple Apple Loops into a project with a different tempo now places them in the expected position.

The minimum duration for Untagged Loops to be recognized as loops rather than one-shots has been lowered to 1. Untagged Loops now play in sync in projects that have been saved with assets. Untagged Loops can now be edited in the Smart Tempo Editor. Dragging multiple Drummer loops to the Tracks area now works correctly. Apple Loop collections are now sorted alphabetically in the Loop Browser.

Changes to the size of the Descriptors section of the Loop Browser are now retained when a project is reloaded out a screenset is recalled. The default playback level between factory installed Apple Loops is now much more consistent. Dragging loops with the same name from the Tracks Area to the Loop Browser no longer fails on every other attempt.

There are now separate key commands available to apply each possible quantization value. There are now key commands to double and halve the current cycle length. There are now separate Key Commands to select the members of each Group. The "Stop or Play and Go to Last Locate Position" key command now continues to work after the playhead has reached the end of the project.

There is now a key command "Select Tracks of Selected Regions. Menu Items in the Take Folder drop-down menu now display their equivalent key commands. ARA edits are now maintained in copied Tracks and comped Take folders. Dragging a second instance of the same audio file into a track no longer causes Melodyne ARA edits on the first instance to be lost. Region selection is now transferred to ARA plug-ins.

When a project that uses ARA is selected to be opened while another project using ARA is already open, Logic now presents a dialog offering to close, and if necessary, save the current project, ARA on a track is now updated properly after Selection Based Processing is performed.

Score Alternating margins are now displayed correctly in the Score. Using the pencil tool to insert pedal markings now alternates them between on and off as expected.

Muting a track now immediately hides it in the All Instruments view in the Score. The original position of an Auto Slur is now displayed as dimmed while editing it. Auto Slurs are now reliably placed correctly when printing a score. Auto Slurs now display correctly in Linear view when zooming in. Fixes an issue where editing an Autoslur causes other Autoslurs to change position slightly.

The Staff Size and Transpose parameters now immediately update in the Styles List when changed in the editor panel. The Staff Editor now immediately appears as expected when switching to a Screenset that includes it.

Adjusting the left corner of a region no longer sometimes causes custom text to disappear in the Score. The Camera Tool now works as expected in Wrapped View. Fixes an issue where the Automation view button occasionally does not work correctly Music XML files exported from Logic that contain mixed staff styles no longer cause Siblelius to quit unexpectedly when opened. Symbols for Auto Slur objects no longer jump unexpectedly when editing other objects. All elements in large scores are now captured reliably by the Camera tool.

Margins on even numbered pages in the Score now display at the correct positions. Insert Multi now inserts events to correct positions in regions that have had their left corner and positions changed.

Inserting line breaks using the contextual menu now works as expected. Auto Slurs no longer display outside the page margins. Autoslur settings are now retained when the start or end note is modified. Fixes an issue where graphic artifacts could appear in the Score area after scrolling and opening a print preview of the window.

Undo An Undo step is now created when switching the channel input mode on a channel in the Mixer. Undo now works as expected after a line break is created in the Score. Undo now reliably undoes the creation of Marker Sets. Adding a ReCycle file no longer causes Undo to stop working. Undo now works in the Staff Styles window as expected. Deleting a group in the Project Audio window now creates an Undo step. Undo now works properly after writing Pan automation.

Fixes an issue where performing Undo after making several Flex edits in quick succession sometimes removes multiple edits. Undo after recording now works on grouped tracks in cases where the last track in the group is selected, and the Take folders in all other tracks in the group are disclosed. The "Copy Regions to Focused Track" command and Marquee selection now work in Track Alternatives when a Take folder is disclosed Auto-colorize takes now assigns the correct colors to takes recorded on tracks other than Audio 1.

Crossfades rather than fadeouts are now applied as expected to region boundaries of regions manually moved within Take folders. Dynamic Plug-in Loading Plug-ins in frozen tracks that were selected when the project was saved no longer are active when the project is reopened. Tab to navigate between fields in the Bounce dialog now works correctly. Ties to chords now display properly in exported XML files.

Logic no longer prompts to save a project after bouncing in cases where "Add to project" is turned off. Logic projects at a sample rate higher than The Bounce in Place dialog now remembers the previous used destination track setting. Automation is now reliably copied to new tracks created when bouncing in place.

MIDI files are now exported with note events in their correct positions in cases where the project starts earlier than 1 1 1 1, and there is a Folder track containing sub-tracks.

Tempo is now correctly imported from audio tracks imported from another Logic project. Levels on Track Stacks are retained correctly when they are imported to a different project. Drummer regions in projects imported from Music Memos no longer show chord names. Duplicating a track stack no longer causes associated Smart Controls to stop working on the original and the duplicated track stack. Performing Undo after using the "Delete all Patch Mappings" command in the Smart Controls now restores the mappings and expected.

Fades It is now possible to create fade-outs on multiple regions in a group of tracks when the regions already include fade-ins. It is now possible to selectively remove Fade-ins, Fade-Outs, Crossfades or all Fades from the contextual menu on regions. Articulations Articulations for Chinese and Japanese instruments now display their correct articulations. It is now possible to set a MIDI channel for an articulation for which no type has yet been set.

When writing automation in Latch mode, the last automation point written before stopping is now maintained to the end of the project in cases where there are no existing automation points after that position. It is now possible for control surfaces learn parameters in the LCD. Connected Logic Control hardware now consistently wakes up when "Bypass All Control Surfaces" is enabled, "Automatic Installation" is turned off, or when another control surface device that sends Universal Device reply messages is also connected.

The display of inserts on Eucon control surfaces now updates to reflect changes made in the Logic project. Double-clicking a Control Surface control bar in the Track header now opens the Control Surface setup window, with the relevant device selected. Fixes an issue where Control Surface indicator bars unexpectedly display in the Track header when there is no control surface connected.

A second connected control surface of the same type now reliably works when using class compliant MIDI drivers. Logic now detects and installs a connected and powered Mackie Control surface at launch.

Custom names for tempo sets are now retained as expected when tempo smoothing or average tempo is applied to the set. Tempo events deleted from the Tempo Track are now immediately removed from the Tempo List in all cases. When a Key Signature is created by key command, the first field in the dialog is now immediately selected. It is now possible to Beat Map a flexed region in which the region start has been edited.

Markers pasted along with regions are now placed correctly when the original position is not on a bar. Copying and pasting Tempo events in the Tempo Track no longer also pastes previously copied events from other Global Tracks. Command-clicking a Marker no longer unexpectedly moves it a beat to left at certain zoom levels.

The correct Tempo information is now pasted when the copied section includes a tempo curve. Fixes an issue where Command-double-click to rename a Marker in the Marker track renames the Marker under the Playhead instead of the one clicked.

A position guide line is now displayed when adjusting the left or right edge of a Marker in the Marker Track. The vertical guide line when dragging regions now extends into the Global Tracks. The maximum possible Numerator value for time signatures has been increased to In cases where the project contains only one key signature, adding a key signature in the LCD now always changes the project key signature rather than inserting a change at the current playhead position.

It is now possible to drag regions to an inactive Track Alternative on the bottom-most track in the track list. Track Stacks The overview region for a closed Track Stack no longer includes hidden tracks. Track Stack overview regions that contain tracks with overlapping regions can now be moved.

Editing Changes to names in the Mapped Instrument editor are now immediately reflected in the Mapped Instrument window. Quantize note position now works from Transform Sets. Option-dragging a note in the Piano Roll no longer causes a shortened region to revert to its original length. The width of the Piano Roll Inspector is now properly maintained when switching between tracks that do not have note name labels and those that do.

The chord display in the Piano Roll shows open 5th chords as expected. New Piano Roll windows now open with the visible area centered around the Playhead or selected notes if Catch Playhead is on. Hovering over a note border in the Piano Roll while using Option-Control to zoom no longer unexpectedly shows the Trim tool. The Audio Track Editor now displays selected content correctly when switching takes. The Piano Roll chord display now reflects all selected notes, regardless of position.

Region position and length can now be edited correctly in the Event List. When the Piano Roll is set as the preferred editor to open when double-clicking a MIDI region, double-clicking an alias now opens the Piano Roll to the contents of the region when the "Original" button is pressed in the dialog.

Option-dragging to copy notes beyond the current right border of a region in the Piano Roll now automatically extends the length to accommodate the copied notes. Using the Eraser tool to delete a note in the Piano Roll no longer sets the default note length for subsequently added notes. The vertical scroll position of one Piano Roll no longer affects the vertical scroll position of other open Piano Roll windows when Link is not active.

Typed-in velocity values in the Event Editor now immediately take effect when another event is double-clicked. General Quick Help for the Tools menu now shows key commands. The Keyboard window octave labels now immediately update if the "Display Middle C as" preference is changed. The Project Audio window now shows the last known path for missing audio files. Gluing multiple regions that are reversed in the Region inspector now leads to the correct result. The LCD configured to display tempo as a whole number correctly rounds the number.

Logic projects created by "Save a Copy As" now retain Finder color tags that were applied to the original project. There is now a visual overlay along the length of selected tracks in the Tracks area. Another new feature is Flex Pitch, Logic Pro X is a collection of new ways to record music and songs.

For professionals, this easy-to-use program will be a tremendous help. The function of connecting the module of percussion parts will help create realistic tracks of professional work that harmoniously merge into any musical genre. July 6, July 6, Communities Get Support. Sign in Sign in Sign in corporate. Browse Search. Ask a question. User profile for user: Vamvany Vamvany. Audio Speciality level out of ten: 0. The update started.

I then noticed the open Logic When the update was complete I tried opening the new Logic to continue with my project. I called Apple and have a case number Case I have trawled the internet for a fix without success. I need help and ideas of what to do. More Less. Reply I have this question too 1 I have this question too Me too 1 Me too. However, after using Logic Pro X, it is hard to migrate to any other music software.

I find myself able to create music with relative ease that the other DAWs just are not capable of. The MIDI capabilities alone are second to none in Logic and the ability to compose music in all styles makes it the best of the best.

Another huge plus is the constant and free updates Apple provides… updates that are really upgrades in the quality and number of plug-ins and soft instruments built into the program. Composing music or just recording a band is easy with this software. Whether you are into acoustic, jazz, electronica or rock, this software package is the best there is and gets updated constantly by Apple. Apple takes this software very seriously and I commend them for their excellence.

Version However, it does have on issue now with Flex Pitch and Flex Tim.